Creative Engineers,Delhi Malhar Pumps is well known industrial pumps manufacturers and supplier in India established in 2000. Provide best service as per customer requirement.Industrial Pumps Manufacturers -Flow Meter Mud Pumps ,Sump Pump,centrifugal pumps.
MAKE AN ENQUIRY
SEND
Open on Sunday - Saturday from 9:00AM to 8:30PM
SITE SENSE TAGS
0  subscribers
0  visits
SHARE WITH OTHERS
SEARCH
  • CAST IRON/BRONZE MULTISTAGE PUMP IN DELHI,INDIA. Applications and Industries: Irrigation – Sprinkler Installations Pressure Boosting – Multistage story Building – Hydro – Pneumatic Water Works Fire Fighting – Mining wash down Applications Hydraulic press / Circuits transfer & circulation hot & cold water Boiler feed pumps – Condensate pumps Features: Vertically split suction. intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets or 'O' ring as required by the design, pumping temperature of the liquid pumped and the construction of the pump Grease lubricated Antifriction Bearings designed to meet the requirements mounted on either side Pump uses soft graphite lubricated asbestos. The shaft is fitted with renewable shaft sleeve in the region of the stuffing box, which protects the shaft from wear due to packing. Special water-jacketed stuffing boxes, and special design of stuffing boxes with mechanical seals are available The discharge nozzle is top vertical. Suction nozzle horizontal located on the right hand side, left hand side or central position when viewed from the driving end Is available. The flanges are round corresponding to international standards The direction of rotation is clockwise as viewed from the driving end https://productimages.withfloats.com/tile/57cd36759ec66812a8dd496a.jpg

     CAST IRON/BRONZE MULTISTAGE PUMP IN DELHI,INDIA.
    Contact us for More Details

    In stock Available

    Applications and Industries:
    Irrigation – Sprinkler Installations
    Pressure Boosting – Multistage story Building – Hydro – Pneumatic
    Water Works Fire Fighting – Mining wash down Applications
    Hydraulic press / Circuits transfer & circulation hot & cold water
    Boiler feed pumps – Condensate pumps


    Features:
    Vertically split suction. intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets or 'O' ring as required by the design, pumping temperature of the liquid pumped and the construction of the pump
    Grease lubricated Antifriction Bearings designed to meet the requirements mounted on either side
    Pump uses soft graphite lubricated asbestos. The shaft is fitted with renewable shaft sleeve in the region of the stuffing box, which protects the shaft from wear due to packing. Special water-jacketed stuffing boxes, and special design of stuffing boxes with mechanical seals are available
    The discharge nozzle is top vertical. Suction nozzle horizontal located on the right hand side, left hand side or central position when viewed from the driving end Is available. The flanges are round corresponding to international standards
    The direction of rotation is clockwise as viewed from the driving end

    ...more details
  • POLYPROPELENE PUMP - MHPP IN DELHI, INDIA. APPLICATION Water treatment Plant Effluent Treatment Filter Press for dyes and chemicals Fertilizer Plants Thermal and atomic power plants Drugs & Pharmaceutical Industries Descaling of Tubes Scrubbing of corrosive gases like C12 , Br , I So2 , NH3 , F2 Etc. Excellent for vacuum ejectors Transferring of concentrated HCL from road tankers Paper & Pulp industries Pickling in steel rolling mills Caustic soda plants :- Chlorinated Brine , Conc , HCL , Dilute H2SO4 etc. PHOSPHORIC Acid Plants :- H3PO4 , H2SO4 , HF and their mixtures with or without solid (gypsum) up to 40% conc. Gas Washing Plants :- Scrubbed Liquids containing CL2 , BR2 , F2 , I2 , SO2 , SO3 , CO2 , NH3 , Gases etc. with solids replace Hast Alloy. Rayon Plants :- Spin bath solution (H2SO4 , ZNSO4 , NaSo4 , etc.) Electro Plating Pumps are Available in different mounting constructions like Horizontal Bare pump , Monoblock pump and Vertical pump Pumps are supply with PTFE Gland Packing or Mechanical seal fitted. Polypropylene parts are manufactured by solid injection molding process. Mechanical seal are provide of Ceramic / GFT Face or Silicon face with Teflon bellow as per application. Gland Packing are used of PTFE Impregnated or PTFE Graphite reinforced as per application Suitable for continuous service. Pump casing is provide with external metal ring for construction stability. All non PP parts lined with anti corrosive paint to protect corrosive atmosphere https://productimages.withfloats.com/tile/57cd373d9ec6682fac8773e3.jpg

    POLYPROPELENE PUMP - MHPP IN DELHI, INDIA.
    Contact us for More Details

    In stock Available

    APPLICATION
    Water treatment Plant
    Effluent Treatment
    Filter Press for dyes and chemicals
    Fertilizer Plants Thermal and atomic power plants
    Drugs & Pharmaceutical Industries
    Descaling of Tubes
    Scrubbing of corrosive gases like C12 , Br , I So2 , NH3 , F2 Etc.
    Excellent for vacuum ejectors
    Transferring of concentrated HCL from road tankers
    Paper & Pulp industries
    Pickling in steel rolling mills
    Caustic soda plants :- Chlorinated Brine , Conc , HCL , Dilute H2SO4 etc.
    PHOSPHORIC Acid Plants :- H3PO4 , H2SO4 , HF and their mixtures with or without solid (gypsum) up to 40% conc.
    Gas Washing Plants :- Scrubbed Liquids containing CL2 , BR2 , F2 , I2 , SO2 , SO3 , CO2 , NH3 , Gases etc. with solids replace Hast Alloy.
    Rayon Plants :- Spin bath solution (H2SO4 , ZNSO4 , NaSo4 , etc.)
    Electro Plating


    Pumps are Available in different mounting constructions like Horizontal Bare pump , Monoblock pump and Vertical pump
    Pumps are supply with PTFE Gland Packing or Mechanical seal fitted.
    Polypropylene parts are manufactured by solid injection molding process.
    Mechanical seal are provide of Ceramic / GFT Face or Silicon face with Teflon bellow as per application.
    Gland Packing are used of PTFE Impregnated or PTFE Graphite reinforced as per application Suitable for continuous service.
    Pump casing is provide with external metal ring for construction stability.
    All non PP parts lined with anti corrosive paint to protect corrosive atmosphere

    ...more details
  • VERTICAL GLANDLESS PP PUMP IN DELHI,INDIA. OPERATION ADVANTAGES OF GLANDLESS PUMP:- The recognizable leading improvement is the deletion of problems get to your feet from the use of powered seal, insulation box and inside bearing. The aptitude of pump to run dry eliminates single reason of interruption which is regularly attributable to the human component this feature is very convenient in process needing continuous transference of a corrosive fluid with a high gradation of reliability e.g. Disposal of acid effluent. The glandless pumps lend itself to process incorporating automatic control of a pump discharge valve. The "controlled leakage" acts as an integral by-pass. The pump suffers no ill effects if the discharge valve is partially or fully closed. The maximum main improvements to be derivative from the use of glandless pump are in the province of maintenance and following reduction in down time invention victims. Normal maintenance on the glandless pump is confined to lubrication of the driving. SAILENT FEATURES OF VERTICAL GLANDLESS PUMP No mechanical seal, stuffing box and internal bearings provided. No maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal Bearings. Reduction of downtime production losses in view of above features. All the wet-end parts are in solid molded construction to with stand corrosion and erosion. The impeller is semi-open type used in our all-vertical pumps to suit both clear and polluted fluids. Pump mounted outside the suction tank and is not submerged type. Polypropylene are manufactured by solid injection molding process with high pressure hence. TEMPERATURE RESISTANCE PP 50º TO 80 º C PPH 90 º TO 100 ºC PVDF 100º TO 115ºC https://productimages.withfloats.com/tile/57cd38b99ec6682fac8774b2.jpg

     VERTICAL GLANDLESS PP PUMP IN DELHI,INDIA.
    Contact us for More Details

    In stock Available

    OPERATION ADVANTAGES OF GLANDLESS PUMP:-
    The recognizable leading improvement is the deletion of problems get to your feet from the use of powered seal, insulation box and inside bearing.
    The aptitude of pump to run dry eliminates single reason of interruption which is regularly attributable to the human component this feature is very convenient in process needing continuous transference of a corrosive fluid with a high gradation of reliability e.g. Disposal of acid effluent.
    The glandless pumps lend itself to process incorporating automatic control of a pump discharge valve. The "controlled leakage" acts as an integral by-pass. The pump suffers no ill effects if the discharge valve is partially or fully closed.
    The maximum main improvements to be derivative from the use of glandless pump are in the province of maintenance and following reduction in down time invention victims. Normal maintenance on the glandless pump is confined to lubrication of the driving.

    SAILENT FEATURES OF VERTICAL GLANDLESS PUMP
    No mechanical seal, stuffing box and internal bearings provided.
    No maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal Bearings.
    Reduction of downtime production losses in view of above features.
    All the wet-end parts are in solid molded construction to with stand corrosion and erosion.
    The impeller is semi-open type used in our all-vertical pumps to suit both clear and polluted fluids.
    Pump mounted outside the suction tank and is not submerged type.
    Polypropylene are manufactured by solid injection molding process with high pressure hence.
    TEMPERATURE RESISTANCE
    PP 50º TO 80 º C
    PPH 90 º TO 100 ºC
    PVDF 100º TO 115ºC

    ...more details
  • GLANDLESS PP PUMP IN DELHI, INDIA. FEATURES:- Seal less Gland less Non magnetic driven Working principle: we have made shaft and stuffing box long and provide special arrangement in stuffing box with groove on shaft in such a way that liquid which come out from stuffing box will go back again to casing . Some liquid is may be come out but due to deep stuffing box it will remain in stuffing box and we have provide one hole in box which is connected to suction flange of pump by pipe line so liquid will again move to suction line and thus pump do not have any leakage from shaft . This pump is very ideal for solvents , acids and corrosives liquids where maintenance of mechanical seal is costly and also time consuming . Our complete CF series pumps will be soon available with above features and after some time we also give PP pumps with same features. WATER RATING CHART OF :CFL: "CFS" SERIES Model Hp Size Head in Metres Discharge in LPM at 2900 RPM 3 5 7 10 12 15 17 20 22 25 27 30 35 40 CFLCFS-1 0.25 12 x 12 40 32 - - - - - - - - - - - - CFLFS-2 0.5 25 x 25 - 100 45 - - - - - - - - - - - CFLCFS-3 1 25 x 25 - - 140 120 70 35 - - - - - - - - CFLCFS-3A 1 38 x 38 - - 181 95 50 - - - - - - - - - CFLCFS-4A 1.5 38 x 38 - - - - 160 130 90 75 - - - - - CFLCFS-4B 1.5 50 x 50 - - - 250 166 85 - - - - CFLCFS-5A 2 38 x 38 - - - - 225 190 155 105 78 40 - - - CFLCFS-5B 2 50 x 50 - - 330 250 160 80 - - - - - - - - CFLCFS-6A 3 50 x 38 - - - - - 250 220 180 135 108 50 CFLCFS-6B 3 50 x 50 - - - - - 330 300 280 225 150 85 - - - Model Hp Size Head in Metres Discharge in LPM at 2900 RPM 16 20 24 28 32 36 40 44 48 CFLCFS-7A 5 50 x 38 - - 260 230 190 145 90 - - CFLCFS-7B 5 65 x 50 400 370 300 230 180 - - - - CFLCFS-8A 7.5 50 x 38 - - 290 280 250 225 190 120 60 CFLCFS-8B 7.5 65 x 50 500 450 385 280 230 - - - - CFLCFS-9A 10 50 x 38 - 500 480 470 450 410 350 290 190 CFLCFS-9B 10 65 x 50 560 510 450 370 280 210 150 - - https://productimages.withfloats.com/tile/57cd3a7f9ec66812a8dd4b41.jpg

    GLANDLESS PP PUMP IN DELHI, INDIA.
    Contact us for More Details

    In stock Available

    FEATURES:-
    Seal less
    Gland less
    Non magnetic driven
    Working principle: we have made shaft and stuffing box long and provide special arrangement in stuffing box with groove on shaft in such a way that liquid which come out from stuffing box will go back again to casing .
    Some liquid is may be come out but due to deep stuffing box it will remain in stuffing box and we have provide one hole in box which is connected to suction flange of pump by pipe line so liquid will again move to suction line and thus pump do not have any leakage from shaft .
    This pump is very ideal for solvents , acids and corrosives liquids where maintenance of mechanical seal is costly and also time consuming .
    Our complete CF series pumps will be soon available with above features and after some time we also give PP pumps with same features.

    WATER RATING CHART OF :CFL:
    "CFS" SERIES
    Model
    Hp
    Size
    Head in Metres Discharge in LPM at 2900 RPM
    3
    5
    7
    10
    12
    15
    17
    20
    22
    25
    27
    30
    35
    40
    CFLCFS-1
    0.25
    12 x 12
    40
    32
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    CFLFS-2
    0.5
    25 x 25
    -
    100
    45
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    CFLCFS-3
    1
    25 x 25
    -
    -
    140
    120
    70
    35
    -
    -
    -
    -
    -
    -
    -
    -
    CFLCFS-3A
    1
    38 x 38
    -
    -
    181
    95
    50
    -
    -
    -
    -
    -
    -
    -
    -
    -
    CFLCFS-4A
    1.5
    38 x 38
    -
    -
    -
    -

    160
    130
    90
    75
    -
    -
    -
    -
    -
    CFLCFS-4B
    1.5
    50 x 50
    -
    -
    -

    250
    166
    85

    -
    -
    -
    -
    CFLCFS-5A
    2
    38 x 38
    -
    -
    -
    -
    225
    190
    155
    105
    78
    40

    -
    -
    -
    CFLCFS-5B
    2
    50 x 50
    -
    -
    330
    250
    160
    80
    -
    -
    -
    -
    -
    -
    -
    -
    CFLCFS-6A
    3
    50 x 38
    -
    -
    -
    -

    -
    250
    220
    180
    135
    108
    50

    CFLCFS-6B
    3
    50 x 50
    -
    -
    -
    -
    -
    330
    300
    280
    225
    150
    85
    -
    -
    -

    Model
    Hp
    Size
    Head in Metres Discharge in LPM at 2900 RPM

    16
    20
    24
    28
    32
    36
    40
    44
    48

    CFLCFS-7A
    5
    50 x 38
    -
    -
    260
    230
    190
    145
    90
    -
    -

    CFLCFS-7B
    5
    65 x 50
    400
    370
    300
    230
    180
    -
    -
    -
    -

    CFLCFS-8A
    7.5
    50 x 38
    -
    -
    290
    280
    250
    225
    190
    120
    60

    CFLCFS-8B
    7.5
    65 x 50
    500
    450
    385
    280
    230
    -
    -
    -
    -

    CFLCFS-9A
    10
    50 x 38
    -
    500
    480
    470
    450
    410
    350
    290
    190

    CFLCFS-9B
    10
    65 x 50
    560
    510
    450
    370
    280
    210
    150
    -
    -

    ...more details
  • Back Pullout Pumps in Delhi, India Features : More than 3mm corrosion allowance (cast iron) for extended use on corrosive applications. Back-pull-out construction allows rotating assembly to be with drawn without disturbing the suction and delivery connections. one piece self vanted foot mounted, center suction volute casting, single stage, closed / semi open dynamically balanced impeller. Flange drilling standards as per DIN 24255 / ISO 2858 or as per customer's requirement. Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar. A robust and solid construction that guarantees long life even under high suction pressure conditions. Heavy-duty, deep-grooved bearings with minimum 50,000 hours operating life under normal condition. (Grease lubricated, oil lubrication available on request) Heavy-duty, stiff solid shaft design with low L3/D4 ratio ensures less than 0.05mm shaft deflection at the seal face in all operating condition. This extends the seal life. Seal housing is constructed to accommodate different seal/gland designs, so as to meet the severe heavy-duty requirements. Excellent parts interchangeability reduces inventory levels for spare parts to a minimum. Special design for high temperature thermic fluid available in request. Motor or Engine driven set Special Monoblock versions available on request Applications and Operating Range: Back Pullout Pumps "BPO" For pumping clear/turbid water/chemicals & volatile liquids. Air conditional plants, power station, mine drainage, sprinkler systems fire fighting, booster service, oils, brine. Delivery sizes up to 250mm Capacity up to 990 m3/hr Head up to 120 meters RPM 500 to 3600 https://productimages.withfloats.com/tile/57cd53809ec6682fac877ea9.jpg

     Back Pullout Pumps in Delhi, India
    Contact us for More Details

    In stock Available

    Features :


    More than 3mm corrosion allowance (cast iron) for extended use on corrosive applications.
    Back-pull-out construction allows rotating assembly to be with drawn without disturbing the suction and delivery connections.
    one piece self vanted foot mounted, center suction volute casting, single stage, closed / semi open dynamically balanced impeller.
    Flange drilling standards as per DIN 24255 / ISO 2858 or as per customer's requirement.
    Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
    A robust and solid construction that guarantees long life even under high suction pressure conditions.
    Heavy-duty, deep-grooved bearings with minimum 50,000 hours operating life under normal condition. (Grease lubricated, oil lubrication available on request)
    Heavy-duty, stiff solid shaft design with low L3/D4 ratio ensures less than 0.05mm shaft deflection at the seal face in all operating condition. This extends the seal life.
    Seal housing is constructed to accommodate different seal/gland designs, so as to meet the severe heavy-duty requirements.
    Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
    Special design for high temperature thermic fluid available in request.
    Motor or Engine driven set
    Special Monoblock versions available on request

    Applications and Operating Range:
    Back Pullout Pumps "BPO"
    For pumping clear/turbid water/chemicals & volatile liquids.
    Air conditional plants, power station, mine drainage, sprinkler systems fire fighting, booster service, oils, brine.
    Delivery sizes up to 250mm
    Capacity up to 990 m3/hr
    Head up to 120 meters
    RPM 500 to 3600

    ...more details
  • HORIZONTAL MULTISTAGE MONOBLOC PUMP IN DELHI,INDIA. APPLICATIONS:- Feed Pumps for R.O. System, Pressure Boosting Systems, Pressure Jet-Cleaning, Water Distribution, Refrigerant Recycling , Very Light and Non Aggressive Chemicals Transfer. Drip Irrigation System. CONNECTION AND WORKING RANGE :- Connections:- 1” BSP Female Thread, Working Pressure kg/cm2 :- 1 to 7, Temp Range ºc :- -15 to 75, Maximum Ambient Temperature :- 50ºc https://productimages.withfloats.com/tile/57cd5f2b9ec6682fac8782f5.jpg

    HORIZONTAL MULTISTAGE MONOBLOC PUMP IN DELHI,INDIA.
    Contact us for More Details

    In stock Available

    APPLICATIONS:-
    Feed Pumps for R.O. System,
    Pressure Boosting Systems,
    Pressure Jet-Cleaning,
    Water Distribution,
    Refrigerant Recycling ,
    Very Light and Non Aggressive Chemicals Transfer.
    Drip Irrigation System.


    CONNECTION AND WORKING RANGE :-
    Connections:- 1” BSP Female Thread,
    Working Pressure kg/cm2 :- 1 to 7,
    Temp Range ºc :- -15 to 75,
    Maximum Ambient Temperature :- 50ºc

    ...more details
  • HORIZONTAL MULTISTAGE CENTRIFUGAL PUMP IN DELHI, INDIA. Applications and Industries: Irrigation – Sprinkler Installations Pressure Boosting – Multistage story Building – Hydro – Pneumatic Water Works Fire Fighting – Mining wash down Applications Hydraulic press / Circuits transfer & circulation hot & cold water Boiler feed pumps – Condensate pumps Features: Vertically split suction. intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets or 'O' ring as required by the design, pumping temperature of the liquid pumped and the construction of the pump Grease lubricated Antifriction Bearings designed to meet the requirements mounted on either side Pump uses soft graphite lubricated asbestos. The shaft is fitted with renewable shaft sleeve in the region of the stuffing box, which protects the shaft from wear due to packing. Special water-jacketed stuffing boxes, and special design of stuffing boxes with mechanical seals are available The discharge nozzle is top vertical. Suction nozzle horizontal located on the right hand side, left hand side or central position when viewed from the driving end Is available. The flanges are round corresponding to international standards The direction of rotation is clockwise as viewed from the driving end https://productimages.withfloats.com/tile/57cd5f5f9ec6682ca8419c0d.jpg

     HORIZONTAL MULTISTAGE CENTRIFUGAL PUMP IN DELHI, INDIA.
    Contact us for More Details

    In stock Available

    Applications and Industries:
    Irrigation – Sprinkler Installations
    Pressure Boosting – Multistage story Building – Hydro – Pneumatic
    Water Works Fire Fighting – Mining wash down Applications
    Hydraulic press / Circuits transfer & circulation hot & cold water
    Boiler feed pumps – Condensate pumps


    Features:
    Vertically split suction. intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets or 'O' ring as required by the design, pumping temperature of the liquid pumped and the construction of the pump
    Grease lubricated Antifriction Bearings designed to meet the requirements mounted on either side
    Pump uses soft graphite lubricated asbestos. The shaft is fitted with renewable shaft sleeve in the region of the stuffing box, which protects the shaft from wear due to packing. Special water-jacketed stuffing boxes, and special design of stuffing boxes with mechanical seals are available
    The discharge nozzle is top vertical. Suction nozzle horizontal located on the right hand side, left hand side or central position when viewed from the driving end Is available. The flanges are round corresponding to international standards
    The direction of rotation is clockwise as viewed from the driving end

    ...more details
  • HORIZONTAL SELF PRIMING PUMP IN DELHI,INDIA. FEATURES:- All wetted parts of pumps are made from lost wax process (investment casting), so excellent surface finish. smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc. Centripetal / regenerative impeller for better suction. Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as fee customer's requirements. Single /multistage pumps to handle crystal cleat liquids for high pressure duties. Very quick priming, no need of foot valves. Very high suction capacity up to 8 meters without much noise Various types of sealing arrangements as per customer's liquid characteristics. Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber, Pumps are available in monobloc and in bare type also with flameproof motor. All motors are of "TCFC" type Pump can be offered with electro polishing for some special Requirements. Able to handle temperature up to 80 C Trolley mounted available. Also available with 120 Volt / 60 Hz. Custom built pumps available https://productimages.withfloats.com/tile/57cd60129ec6682fac878325.jpg

    HORIZONTAL SELF PRIMING PUMP IN DELHI,INDIA.
    Contact us for More Details

    In stock Available

    FEATURES:-
    All wetted parts of pumps are made from lost wax process (investment casting), so excellent surface finish. smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc.
    Centripetal / regenerative impeller for better suction.
    Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as fee customer's requirements.
    Single /multistage pumps to handle crystal cleat liquids for high pressure duties.
    Very quick priming, no need of foot valves.
    Very high suction capacity up to 8 meters without much noise
    Various types of sealing arrangements as per customer's liquid characteristics.
    Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber,
    Pumps are available in monobloc and in bare type also with flameproof motor.
    All motors are of "TCFC" type
    Pump can be offered with electro polishing for some special Requirements.
    Able to handle temperature up to 80 C
    Trolley mounted available.
    Also available with 120 Volt / 60 Hz.
    Custom built pumps available

    ...more details
  • EXTERNAL GEAR PUMP IN DELHI,INDIA FEATURES:- All Positive displacement rotary gear pumps are self priming pumps with suction lift of 5 meters at mean viscosity and speed 1440 rpm The SEG series of MALHAR pump has modified profile of teeth to give accurate discharge within the pressure range . The helical gear design delivers constant volume without and pulsation. It also reduces internal slippage and gives high volumetric efficiency. Compact in size and highly economical All these are self lubricated pumps recommended for use where the liquid to be transferred has lubrication properties Hence the bearing are lubricated by the pumping fluid and do not need any external lubrication. Easy maintenance due to availability and interchangeability of spares. All MALHAR gear pumps are designed and assembled and with close tolerances to reduce the mechanical losses, thus it consumes less power and operates at higher efficiency. RANGE:- Pressure : Up to 10 Kg / cm2 Discharge :10 LPM to 500 LPM Pipe Size :1/4” BSP to 3” BSP APPLICATION:- “MALHAR” Rotary gear pumps are useful for handling following viscous and semi viscous liquid. Clean lube oil, Castor oil, Coconut oil, Ground nut oil, Cotton seed oil and Hydraulic oil. All kind of vegetable oils. Paints & Varnish , Viscous Chemical , Printing Ink. All Kind of fish and animal oils. Soap Solutions , Glycerin , Glycol and Glue Sugar molasses and syrups. Rotary gear pumps are widely used in paper mills, refineries, Steel mills and textile Industries https://productimages.withfloats.com/tile/57cd62bf9ec6682fac878430.jpg

    EXTERNAL GEAR PUMP IN DELHI,INDIA
    Contact us for More Details

    In stock Available


    FEATURES:-
    All Positive displacement rotary gear pumps are self priming pumps with suction lift of 5 meters at mean viscosity and speed 1440 rpm
    The SEG series of MALHAR pump has modified profile of teeth to give accurate discharge within the pressure range .
    The helical gear design delivers constant volume without and pulsation. It also reduces internal slippage and gives high volumetric efficiency.
    Compact in size and highly economical
    All these are self lubricated pumps recommended for use where the liquid to be transferred has lubrication properties Hence the bearing are lubricated by the pumping fluid and do not need any external lubrication.
    Easy maintenance due to availability and interchangeability of spares.
    All MALHAR gear pumps are designed and assembled and with close tolerances to reduce the mechanical losses, thus it consumes less power and operates at higher efficiency.
    RANGE:-
    Pressure : Up to 10 Kg / cm2
    Discharge :10 LPM to 500 LPM
    Pipe Size :1/4” BSP to 3” BSP


    APPLICATION:-
    “MALHAR” Rotary gear pumps are useful for handling following viscous and semi viscous liquid.
    Clean lube oil, Castor oil, Coconut oil, Ground nut oil, Cotton seed oil and Hydraulic oil.
    All kind of vegetable oils.
    Paints & Varnish , Viscous Chemical , Printing Ink.
    All Kind of fish and animal oils.
    Soap Solutions , Glycerin , Glycol and Glue
    Sugar molasses and syrups.
    Rotary gear pumps are widely used in paper mills, refineries, Steel mills and textile Industries

    ...more details
  • HORIZONTAL SPLIT CASING PUMP IN DELHI, INDIA. Applications and Industries: Water supply Building Services 3 . Circulating Water Systems 4. Paper Mills 5. Water / Effluent Treatment 6. Pharmaceuticals 7. Irrigation 8. Sugar Mills 9. Ports and Docks 10. Vegetable Oil Mills 11. Air Conditioning 12. General Industry Requirements 13. Fire fighting Options and Features: Horizontal and vertical Execution and Centre Line Suspension Gland Pack / Mechanical Seals 3 stage HSC Pump with Head up to 170 mtrs and flow up to 350 m3/hr for Condensed Extraction. Bush Bearing arrangement Bearing Cooling arrangement High head pumps have Double Volute Casing Two stage pump-single entry closed type with Impellers Back to Back Range:- Capacities :- UP to 18,000 m3/hr Heads :- UP to 270 m Metallurgy:- Cast Iron / Bronze Combination CF-8M / CA6 NM Combination Ductile Steel and other special Metallurgles https://productimages.withfloats.com/tile/57cd68059ec6682fac878526.jpg

     HORIZONTAL SPLIT CASING PUMP IN DELHI, INDIA.
    Contact us for More Details

    In stock Available

    Applications and Industries:
    Water supply
    Building Services
    3 . Circulating Water Systems 4. Paper Mills
    5. Water / Effluent Treatment
    6. Pharmaceuticals
    7. Irrigation
    8. Sugar Mills
    9. Ports and Docks
    10. Vegetable Oil Mills
    11. Air Conditioning
    12. General Industry Requirements
    13. Fire fighting
    Options and Features:






    Horizontal and vertical Execution and Centre Line Suspension
    Gland Pack / Mechanical Seals
    3 stage HSC Pump with Head up to 170 mtrs and flow up to 350 m3/hr for Condensed Extraction.
    Bush Bearing arrangement
    Bearing Cooling arrangement
    High head pumps have Double Volute Casing
    Two stage pump-single entry closed type with Impellers Back to Back


    Range:-
    Capacities :- UP to 18,000 m3/hr
    Heads :- UP to 270 m
    Metallurgy:-
    Cast Iron / Bronze Combination
    CF-8M / CA6 NM Combination
    Ductile Steel and other special Metallurgles

    ...more details

Pay through Cash On Delivery

Quantity & Price:

Total amount:  
Continue

Contact Details:

Continue

Shipping Address

CONFIRM ORDER
close
Please enter the following details to send a query.





Send Query
close
Ok